How to power an LED stripe and the Arduino Nano with the same power source

Using Arduino Project Guidance
6

SmartKidsKitchenBreadboard-Improvement_Schaltplan.png
SmartKidsKitchenBreadboard-Improvement_Schaltplan.png1518×2007 138 KB

SmartKidsKitchenBreadboard-Improvement_Steckplatine.png
SmartKidsKitchenBreadboard-Improvement_Steckplatine.png2262×1890 507 KB

Your 100uF cap is not connected correctly. It should go across 5V and ground, close to the led strip.

Your "schematic" is an unfinished mess, you should look at other schematics to get a feel for how they should be layed out.