WiFi Robot With sensors

Projects Discussion and Showcase Robotics
1

Hai,
Our main project 'WiFi Robot', and as additions,we decided to implement Temperature,Humidity,...etc Sensors..
We want the open WRT instructions for this topic..
Can any one Help me...

There are three pieces of software that make this project possible. The VB6 Wifi_Robot client application (runs on Windows), the CarServer which is written in C and runs on the router running OpenWRT WhiteRussian v0.9 (Linux), and the microcontroller firmware.

please suggest us some sensors and relevant ideas for our WiFi robot****

also we have a program loaded to our router only for reception of data transmitted via wifi. we have the controller program for the modifications but we need your help to modify the carserver program and make it suitable for the transmission of data(output from temperature sensor) from the arduino to the computer via the WiFi router which is connected serially to the arduino .
the car server server program now we have on the router is given below.
also we want to know how we can visulise these out puts on the computer

my email : arjun_janan@yahoo.co.in
Thanks in advance...

2

arjuntech1:
...
please suggest us some sensors and relevant ideas for our WiFi robot****
...

You need to give us more information. Where can the software you mention be found?? Do you have a project page??

Some suggested sensors here: http://arduino-direct.com/sunshop/index.php?l=product_list&c=17

3
4

Wifi Robot - JBProjects.net is our project page in which Our Problem is , we are making a Wifi Robot Having 4-9 movements and some Sensing Abilities like Temperature, Pressure, Metal Detection, etc.
We already have a Carserver.c in openWRT to install on the router for movements ,and we have to modify it for sensing purposes.

So can give us an openWRT Code for accept the data (from the sensors) from the serial port of the WiFi router (Linksys WRT54GL with openWRT Firmware ) and send it to the Laptop.
If u can please help us...

Go Bless U....!!!!

5

So can give us an openWRT Code for accept the data (from the sensors) from the serial port of the WiFi router (Linksys WRT54GL with openWRT Firmware ) and send it to the Laptop.

Well as this is an arduino forum - we deal in arduino code not openWRT code and even if we did do that code we couldn't simply give some to you - normally one would post some code and we would help them to find out what was wrong and how to get it to work as they want it to.

Also, please stop putting 'u', this is a grown up forum and we don't appreciate stupid abbreviations.

6

Yeah! And religious/political references are not nice either, so go bless u. (no caps u see, so no religious)!

Sorry, just ranting a bit, nicely! Still friends?

Cheers,
Kari