Hi all, I'm working on a project to use an Uno as 1-wire probe in order to publish some humidity data. My test network is 10cm long and is driven by a DS2484 at 5v. If I put a second probe on the network (tested with a DS28EA00), both the DS28EA00 and my Arduino are detected and I'm able to read …

Unable to use an UNO as a slave 1-wire probe (driving bus low issue ? )

destroyedlolo October 21, 2018, 10:13am 5

The DS2484 is managed from OWFS on my Linux box and I guess it's done as the DS28EA00 is working.
The issue is really at 1-wire side

Topic		Replies	Views
Uno as 1-wire slave issue Sensors	4	982	May 6, 2021
Arduino-OWI: 1-Wire Master/Slave Library Libraries	5	18872	May 6, 2021
DS2804 use? Project Guidance	3	1828	May 5, 2021
Arduino as 1-wire slave/device Networking, Protocols, and Devices	8	4950	May 6, 2021
Arduino Uno - 1 wire slave emulation - DS2781 Project Guidance	2	863	May 5, 2021