GLCD Troubleshooting

Hi,
I've got KS0108 GLCD connected to the Arduino (Seeeduino - 100% Arduino Diecimila compatible) wired as a common Pinout B panel according to this arduino.cc/playground/Code/GLCDks0108 It supposed to have two lines moving, one from top to the bottom, second one from left to right. LCD is 100% properly connected, but picture is garbled. Any suggestions how to fix it?

GLCD model: LM12864M

Please see picture below along with links to its manual and video.

Thank you in advance!!!

GLCD manual here: http://www.topwaydisplay.com/Pub/Manual/LM12864MBC-Manual-Rev0.1.pdf

Video here: Arduino, Graphic LCD Troubleshooting - YouTube

I have the same problem with a lcd form futurlec

I can see what it is trying to render, but the picture is all scrambled

I have checked the wiring many times, but it is fine.
Followed the tutorial on the playground

Link to the above LCD

varOn, You have asked the same question in another thread.

It's not good to double post. People put a lot of time into responding to requests here and its unfair for someone to go to the effort to find a solution to a quesiton in one thread when it has already been answered in another. Its also helps people experiencing similar problems if all the relevant help is in one place.

I have replied to your post here: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1229827383/

Yeah! Sorry people! When I was posting this topic I thought I'm in Troubleshooting section. But then realized that I'm not!
Anyone who had similar problem or anyone who know the solution please follow this link http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1229827383