Thanks for your answer. Very clear. So, if I have 4 sensors the minum elapsed is 35 ms for the readings and Arduino time. I start reading the first sensor, the second, the third and the forth. If the distance is 20 cm it take 1.4ms x 4 = 5.6 ms. I have almost 30 ms for Arduino to do other things and after restart next reading. But in my experience a normal algo in Arduino, without too much serial monitor printing, take 10-15 ms. If you don't print in the serial monitor the time is always under 10 ms. So 15-20 ms are lost waiting for new sensor reading to avoid the echo.Shame.