Graynomad:
did some one know where are the ADCs 8 and 9 are they missing?
Well spotted Markus
ADC8 -> B.12 -> SDA
ADC9 -> B.13 -> SCLSo it looks like you can get two more more ADCs if you aren't using that I2C port. However those two pins are pulled up by 1k5 resistors, so you'd have to drive the ADC with a low-impedance source.
D87 works on D4
D86 works on Pin D52 it is SS2 the 3rd SPI selectAdded.
Unfortunately the 4th SPI CS pin is not connected.
Will upload new version soon.
Rob
You make an great job, really amazing, in my way you can wipe the Unofficial from the sheet, talk to Massimo this can or should an official Pinout!