at point A.. the output.. i get 001 at 2000m V on my multimeter. at point B i'm getting about 14v. something is obviously wrong. and the batteries are heating up. no wires are touching.. is it possible a switch is bad or somthing?
at point A.. the output.. i get 001 at 2000m V on my multimeter.
What is "001"?
If I understand the circuit correctly you have an open circuit when nothing is connected to the piezos. 2000mv (2V) could be normal. And, you can't reliably measure PWM with a digital multimeter.
at point B i'm getting about 14v.
That's a little low for two 9V batteries. Try breaking the circuit and measuring the current.
Also, make sure that C5 is not reversed.
Is the IC in a socket? If so, try removing it to see if the voltage goes up, and the current goes to zero.