Arduino Forum

Using Arduino => Programming Questions => Topic started by: eldadwasserman on Jan 11, 2014, 07:29 am

Title: How to use Arduino Nano as HID with a specific idvendor number and idproduct num
Post by: eldadwasserman on Jan 11, 2014, 07:29 am
Hi to all.

I need some help how to program the Arduino nano AtMega328 to become HID with specific idvendor and specific idproduct with the option to change these numbers from time to time.

I need this option for checking software comparability for developing a new hardware concept of Bio-signal analysis platform.

It will be really great yo get some help, I didn't find any details how to do it...

Please help me.

Eldad
Title: Re: How to use Arduino Nano as HID with a specific idvendor number and idproduct num
Post by: Caltoa on Jan 11, 2014, 11:01 am
The Arduino Leonardo is ment to act as a USB slave.
http://arduino.cc/en/Main/arduinoBoardLeonardo

For the nano, you could use the V-USB.
http://www.obdev.at/products/vusb/index.html
I think there is a library to use V-USB with the Arduino. I don't know how to set the idvendor and idproduct, but at least there are many examples for the V-USB.