Arduino Forum

General Category => General Discussion => Topic started by: ctabdusamad on Aug 13, 2016, 03:52 am

Title: arduino ethernet icsp pin pblm
Post by: ctabdusamad on Aug 13, 2016, 03:52 am
Hai bros....

I purchased one arduino ethernet shield on last week.
 
But it has some problem, basically the icsp pin 5 and 6 has shorted by soldering by manufacturer.

 So any one help me it is correct or not?











(https://goo.gl/photos/3vcmKtdTzSEQD64x5)

(https://goo.gl/photos/yDFcpUks1hKLVNrg6)

(https://goo.gl/photos/9dzWAa8gxVURTkYbA)
Title: Re: arduino ethernet icsp pin pblm
Post by: CrossRoads on Aug 13, 2016, 05:16 am
Whatever you posted is not viewable.
The short is probably not correct. Look around, see if there some solder where there shouldn't be.
6 is Gnd, 5 is Reset, if Reset is held low things are not going to work.