When i try to upload the sketch (blink) to arduino it says:
avrdude: Version 6.3, compiled on Dec 16 2016 at 13:32:25
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/andreamedola/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.usbmodemFA131
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
I'm on Mac OS Sierra but i tested it also on Windows 10 without results..
I checked the board and the port.. and also the website
http://www.arduino.cc/en/Guide/Troubleshooting#upload
How can i solve this problem?
There are some issues with Sierra so maybe do a search for that in particular. (not a mac guy BTW)
But if you also post the windows stuff I may be able to help.
I just try it on Linux (ubuntu 14 i think..) and it says the same
avrdude: Version 6.3, compiled on Dec 16 2016 at 07:33:21
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/home/andrea/Documenti/Arduino/arduino-1.8.1/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/root/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyACM0
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
etc....
I don't know what can i try to do..
For some reason he's looking in root's home directory for a config file. If you're using the IDE as a normal user, he's not going to let you look in root's home.
I'm guessing you may have run the IDE as root, possibly the first time you ran it.
I just tried opening it as root but it says the same error.. and also it doesn't create the file!
it passed the loop back test so i think i don't have communication problems!
Up
Up
Not sure what the..... you are doing but "up" means NOTHING around here...And if its just to "bump" your thread please be careful as its frowned upon.