Arduino Forum

Forum 2005-2010 (read only) => Software => Troubleshooting => Topic started by: namtrino on Feb 11, 2010, 05:03 am

Title: Problem with ttyUSB0 on Ubuntu-9.04,9.10(32 bit)
Post by: namtrino on Feb 11, 2010, 05:03 am
Dear all

I success to compile example. But i have a problem with avrdude on FTDI. The error is shown below.
Quote
avrdude: Yikes!  Invalid device signature.
        Double check connections and try again, or use -F to override
        this check.


Both of Tx/Rx LED blink for a while when i try to upload hex file to Arduino. Diecimila with atmega168 is my hardware. I already remove brltty from my desktop. Version of Arduino is 0018.

How can i upload software to my arduino on Ubuntu?

Thank you in advance

Title: Re: Problem with ttyUSB0 on Ubuntu-9.04,9.10(32 bit)
Post by: wayoda on Feb 11, 2010, 11:12 am
Hi,
you start with this page:
http://arduino.cc/en/Guide/Troubleshooting
and see if anything helps

Eberhard