Arduino Forum

Using Arduino => Programming Questions => Topic started by: pointpoint85 on Jul 28, 2017, 04:10 pm

Title: Code problem
Post by: pointpoint85 on Jul 28, 2017, 04:10 pm

Hello, I have tried many changes on my code but I still have so many error messages. If anyone could help me this would be really cool
Title: Re: Code problem
Post by: aarg on Jul 28, 2017, 04:20 pm
Did you write it?
Title: Re: Code problem
Post by: pointpoint85 on Jul 28, 2017, 04:28 pm
Not the code is not me
Title: Re: Code problem
Post by: aarg on Jul 28, 2017, 04:34 pm
Then ask the person that wrote it.
Title: Re: Code problem
Post by: larryd on Jul 28, 2017, 04:34 pm
Have you spent any time learning the basics?
There are great examples in the IDE that you can learn from.

.
Title: Re: Code problem
Post by: groundFungus on Jul 28, 2017, 04:35 pm
Which Arduino model are you using (Uno, Mega, ...)?  
Title: Re: Code problem
Post by: pointpoint85 on Jul 28, 2017, 04:46 pm
The problem is that this person to abandon the project and his blog was updated only in 2011. It gives the link containing the arduino 1.0 with all necessary libraries. But with all this impossible to compile the code into arduino 1.0. The card used is an arduino nano

http://blog.openpyro.com/
Title: Re: Code problem
Post by: groundFungus on Jul 28, 2017, 05:32 pm
Do the error messages say something about missing files?  Have you downloaded and properly installed all of the required libraries?  That is my best guess until we get to see the error messages.

Please read the "how to use the forum" stickies to see how to format code, post code and error messages and some hints on what we need to know to help you.
Title: Re: Code problem
Post by: UKHeliBob on Jul 28, 2017, 05:55 pm
OP - due to the nature of the project (a firework display control system) I strongly advise that you do not proceed with this project until you have more experience with the Arduino
Title: Re: Code problem
Post by: (deleted) on Jul 28, 2017, 06:12 pm
(deleted)
Title: Re: Code problem
Post by: pointpoint85 on Aug 07, 2017, 06:09 pm
Get the IDE with inbuilt Libraries here : PYRO_IDE (https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/openpyro/arduino-1.0-windows(with%20all%20libraries%20for%20OpenPyro%20project).zip)
Already tried for a long time but without success.


OP - due to the nature of the project (a firework display control system) I strongly advise that you do not proceed with this project until you have more experience with the Arduino
This is only advice, I am not forced to follow him.