Arduino Forum

Community => Gigs and Collaborations => Topic started by: 31paige on Feb 01, 2018, 04:05 am

Title: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: 31paige on Feb 01, 2018, 04:05 am
I have been searching the web for many hours for help and trying to find help on this subject.

I am currently working on a project where I would like to run one (or two) pressure transducers, an SD card data logger, and a flow sensor meter to help me record data for a water pump. Is this possible to run all of these components at the same time on one arduino? I do not know how the coding would need to be set up but any help (confirmation that this is possible) would be great.

 Attached are pictures of the pressure transducer, SD card data logger, and the flow rate sensor meter.


Thank you!
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: wvmarle on Feb 01, 2018, 04:38 am
Sounds totally viable to me.
Get them working one by one, then integrate into a whole.
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: jimlee2 on Feb 01, 2018, 05:46 am
You should at least say where you are.

-jim lee
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: cedarlakeinstruments on Feb 01, 2018, 02:10 pm
It's completely possible and not particularly complex to implement.
What are you trying to do that can't be accomplished with an off the shelf data logger, though?
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: 31paige on Feb 01, 2018, 02:57 pm
@cedarlakeinstruments  I am trying to record all pressure & flow rate data on an SD card. Any ideas on how I can start this?



Thank you
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: wvmarle on Feb 01, 2018, 03:02 pm
Get them working one by one.
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: cedarlakeinstruments on Feb 02, 2018, 03:07 am
That didn't actually answer my question, but whatever...
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: wvmarle on Feb 02, 2018, 05:31 am
#5 was a reply to the question of #4.

If you want more specific answers, you have to ask more specific questions.
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: cedarlakeinstruments on Feb 02, 2018, 01:13 pm
And #4 was not an answer to my #3
Title: Re: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO
Post by: wvmarle on Feb 02, 2018, 02:05 pm
It's too confusing when everyone is starting to ask questions to everyone else...