Arduino Forum

Using Arduino => Installation & Troubleshooting => Topic started by: DannyPhunk on Nov 08, 2018, 05:32 pm

Title: Upload error on Arduino Nano, ATmega328P
Post by: DannyPhunk on Nov 08, 2018, 05:32 pm
He guys, first time trying to upload anything to this board i got as part of a synth build, but it won't upload :c I have checked through the troubleshooting guide to no avail, heres the error code!

Code: [Select]
Arduino: 1.8.7 (Windows 10), Board: "Arduino Nano, ATmega328P"

Sketch uses 3288 bytes (10%) of program storage space. Maximum is 30720 bytes.
Global variables use 27 bytes (1%) of dynamic memory, leaving 2021 bytes for local variables. Maximum is 2048 bytes.
C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM3 -b115200 -D -Uflash:w:C:\Users\DANIEL~1\AppData\Local\Temp\arduino_build_747677/grainsV21.ino.hex:i

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"

         Using Port                    : COM3
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00

avrdude done.  Thank you.

An error occurred while uploading the sketch

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.


Any help would be much appreciated
Title: Re: Upload error on Arduino Nano, ATmega328P
Post by: sterretje on Nov 08, 2018, 05:41 pm
Try 'old bootloader' from tools->processor.
Title: Re: Upload error on Arduino Nano, ATmega328P
Post by: DannyPhunk on Nov 08, 2018, 06:27 pm
You absolute genius, I can't believe I didn't even think of checking for this, thank you so so much!!
Title: Re: Upload error on Arduino Nano, ATmega328P
Post by: sterretje on Nov 08, 2018, 07:27 pm
Current state of affairs:

'old boot loader' is for clones and the pre 2018 originals. 328P is for the originals manufactured in 2018.