Arduino Forum

Community => Gigs and Collaborations => Topic started by: InovFran on Feb 22, 2019, 02:50 pm

Title: Search mechatronic engineer for creating a tutorial with Arduino board
Post by: InovFran on Feb 22, 2019, 02:50 pm
Hello

We are looking for a maker to create a learning tutorial. This tutorial should be written on a word document with explanatory images of the different steps.

If the mission goes well, other missions may be submitted to you.

The subject of this first tutorial is the control of the ignition and extinction of light, and the speed of rotation of a beacon. Starting from an existing beacon, you will have to explain step by step how to take control of both the lighting of the light and the rotational speed of the beacon using an Arduino board and auxiliary electronic components .


The expected deliverable is a word file which should include the following elements:



The word file should be structured as follows:


The reference of the beacon used must be given so that we can reproduce the tutorial.

We pay this mission, can you give us an offer ?

Best regards,
Title: Re: Search mechatronic engineer for creating a tutorial with Arduino board
Post by: J-M-L on Feb 23, 2019, 10:16 am
Are you trying to get your school project done for a cheap price? what's the context?
Title: Re: Search mechatronic engineer for creating a tutorial with Arduino board
Post by: lastchancename on Mar 25, 2019, 03:46 am
If this has any hope of 'looking' professional- forget the use of Fritzy diagrams.
What's your budget?
Title: Re: Search mechatronic engineer for creating a tutorial with Arduino board
Post by: DannySwarzman on Mar 26, 2019, 06:48 pm
Is the beacon a building or a little thing you can buy from an electronics store?

Is the job to document a circuit and sketch that already exist or to design them?
Title: Re: Search mechatronic engineer for creating a tutorial with Arduino board
Post by: wvmarle on Mar 28, 2019, 02:34 pm
If this has any hope of 'looking' professional- forget the use of Fritzy diagrams.
I've used them in my own tutorials - great for absolute beginners to have a handhold to wire their breadboard, and always in conjunction with a real schematic. It helps to get the first few circuits wired up quickly, instant gratification is great for motivation to continue the course.

After a few lessons the Fritzies disappear and it's schematics only. By then they should know how to read simple schematics and turn it into a breadboard layout.
Title: Re: Search mechatronic engineer for creating a tutorial with Arduino board
Post by: 6v6gt on Mar 28, 2019, 02:50 pm
. . .
The reference of the beacon used must be given so that we can reproduce the tutorial.
. . .
This has to be a readily available part, otherwise the students following the tutorial may not be able to find one. Also, the characteristics of the commercially available beacons may exclude any sort of external control of things like light intensity, motor speed etc. Have you seen a specific part which is appropriate for this tutorial ?