Arduino Forum

Products => Create => IoT Cloud Beta => Topic started by: ZM1000 on Apr 03, 2019, 11:13 am

Title: MKR 1400 USB Driver
Post by: ZM1000 on Apr 03, 2019, 11:13 am
The installation of the USB driver failed
Device is detected as MKR 1400, but no driver found
Title: Re: MKR 1400 USB Driver
Post by: jomoengineer on Apr 05, 2019, 09:59 am
What operating system are you using?

Have you gone through the Getting Started page and installed the appropriate plug-in?
https://create.arduino.cc/getting-started/mkrgsm1400

It would be helpful if you could describe what you have done thus far to get the environment set-up.

Is there any other failure messages that you can share?
Title: Re: MKR 1400 USB Driver
Post by: hennine on May 15, 2019, 11:32 am
I found out were to download a driver so it works.

https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers