Need to run IDE using sudo ?

Using Arduino IDE 1.x
1

Just installed Raspbian on yet another Raspberry Pi 3. Tried running the Arduino IDE, no problems ... until I tried to "Upload Using Programmer". I got this:

avrdude: Warning: cannot open USB device: Permission denied
avrdude: Error: Could not find USBtiny device (0x1781/0xc9f)

If I run the IDE using root privileges (i.e.,sudo), of course it works.

This is not the same behavior I see on my Fedora 29 machine. No need for sudo there.

Any ideas?

Oh yeah, I'm using 1.8.9 with the latest Raspbian updates.

2

There should be no need for sudo. Please do this:

3

Thanks for the reply.

But this really doesn't apply here.

Since I'm using the Pocket AVR Programmer (SparkFun) and there's no device file (/dev/) to check which group has privileges to it.

As a matter of fact I asked about this earlier: Where's the device file for the Pocket AVR Programmer?

Never got a response.

4

OK, sorry I didn't read carefully enough. From the product page, it sounds like the Pocket AVR Programmer is actually a USBtinyISP that Sparkfun decided to give a different name to make things more confusing. Therefore, I think this information will apply:
AVRDUDE | USBtinyISP | Adafruit Learning System. I checked the driver to be sure and the VID and PID are indeed the same as the USBtinyISP.

5

That did it! Thanks!

Just added an additional udev rules file with the prescribed elixir inside and rebooted.

No need for sudo now.

6

You're welcome. I'm glad to hear it's working now. Enjoy!
Per