Arduino Forum

Using Arduino => Avrdude, stk500, Bootloader issues => Topic started by: Lucifer22334 on May 01, 2019, 02:48 pm

Title: Error on Burning Bootloader
Post by: Lucifer22334 on May 01, 2019, 02:48 pm
Hi all,


I am trying to burn Bootloader on ATMEGA328-PU.But It's giving Error:

avrdude: Expected signature for ATmega328P is 1E 95 0F
         Double check chip, or use -F to override this check.
Error while burning bootloader.

So what Can I do to Solve this?
Title: Re: Error on Burning Bootloader
Post by: DBMcDonald on May 01, 2019, 03:13 pm
Each Atmega chip type has a unique identifier.  Your error indicates that it could not identify the chip as an Atmega328-P.

To identify the chip id , check out Nick Gammon's device id sketch and how it works at https://gammon.com.au/forum/?id=11633
Title: Re: Error on Burning Bootloader
Post by: Lucifer22334 on May 01, 2019, 03:18 pm
Each Atmega chip type has a unique identifier.  Your error indicates that it could not identify the chip as an Atmega328-P.

To identify the chip id , check out Nick Gammon's device id sketch and how it works at https://gammon.com.au/forum/?id=11633
Where is the ID in the Output? And What to do After I get it?
Title: Re: Error on Burning Bootloader
Post by: AWOL on May 01, 2019, 03:35 pm
Duplicate post deleted.

Do not cross-post, cross-posting wastes time.
Title: Re: Error on Burning Bootloader
Post by: Lucifer22334 on May 01, 2019, 03:41 pm
I placed the new chip onto Arduino after this Error and tried to upload a Blink Program.
I don't know Why but it worked and it is running great.

I took the new chip placed it on Breadboard and just provided the power supply and it worked.

so is this going to be a problem or it is fine?