Arduino Forum

Products => Arduino WiFi Rev2 => Topic started by: jcm3 on May 02, 2019, 12:36 am

Title: Arduino UNO WiFi REV2 - Dead
Post by: jcm3 on May 02, 2019, 12:36 am
Starting a new project with a Arduino UNO WiFi REV2. Day one with this unit, I unplug it from USB, plug it back in and now its dead. No lights, no voltage on the 3.3 or 5v pins.  I am assuming this is atypical behavior. 

Any ideas as to a restore?
Title: Re: Arduino UNO WiFi REV2 - Dead
Post by: pert on May 02, 2019, 10:08 am
If you have any sheilds, wiring, or components attached to the Uno WiFi Rev2, disconnect them and see if the board alone will work.

Make sure the USB cable is fully plugged into the Uno WiFi Rev2 and your computer.