Arduino Forum

Using Arduino => Project Guidance => Topic started by: Manoj_Prasanga on Sep 20, 2019, 02:50 pm

Title: how can get tool position coordinate through grbl source code
Post by: Manoj_Prasanga on Sep 20, 2019, 02:50 pm
I need to find real time tool position coordinate in the grbl firmware.How can i gat it? Can i use verbose output?If it's possible where is the source file of the verbose output
Title: Re: how can get tool position coordinate through grbl source code
Post by: BJHenry on Sep 20, 2019, 03:05 pm
The very first result when you do a Google search for 'GRBL real time tool position' tells you exactly how to do this. I'd suggest you start there.
Title: Re: how can get tool position coordinate through grbl source code
Post by: zwieblum on Sep 20, 2019, 03:35 pm
Na, it's your job as a forum member to do the job for the TO ... *shake head*
Title: Re: how can get tool position coordinate through grbl source code
Post by: Slumpert on Sep 20, 2019, 03:49 pm
The very first result when you do a Google search for 'GRBL real time tool position' tells you exactly how to do this. I'd suggest you start there.
To be fair, the OP might have searched out so much porn on their computer that google comes up with "different" suggestions.
Title: Re: how can get tool position coordinate through grbl source code
Post by: Manoj_Prasanga on Sep 28, 2019, 01:25 pm
Thanx all of you