Arduino Forum

Products => MKR Boards => MKRWIFI1010 => Topic started by: russell_roberts on Nov 17, 2019, 12:00 pm

Title: WiFiNINA library & MKR 1010 Firmware Version 1.3 & 1.4 missing functions
Post by: russell_roberts on Nov 17, 2019, 12:00 pm
I just quote from the WiFiNINA web page
https://www.arduino.cc/en/Reference/WiFiNINA (https://www.arduino.cc/en/Reference/WiFiNINA)

For easier WiFi connections, from version 1.3.0 the library supports AP Provisioning: if there is no known WiFi network, the module sets up an AP to which you can connect and choose one of the WiFi available, input the credentials, store them and then connect to it. The firmware from version 1.3.0 onward also supports a Storage class, allowing you to store on the module's Flash memory data up to 256KB; it works as our SD class.

I cannot find any information on the 'Storage class' & how to initiate it.
Also the AP Provisioning function does not seem to be implemented in firmware 1.4

I have updated my MKR 1010 to firmware 1.4

Can anyone show me where the Storage class is implemented in the arduino libraries
and does anyone know about the missing function
Title: Re: WiFiNINA library & MKR 1010 Firmware Version 1.3 & 1.4 missing functions
Post by: Juraj on Nov 17, 2019, 09:48 pm
there is no 1.3 or 1.4 firmware yet. 1.2.4 is latest.  the library is at version 1.4
the provisioning and the storage are still not ready
https://github.com/arduino/nina-fw/pulls
https://github.com/arduino-libraries/WiFiNINA/pulls
Title: Re: WiFiNINA library & MKR 1010 Firmware Version 1.3 & 1.4 missing functions
Post by: russell_roberts on Nov 18, 2019, 09:41 am
whoops. Thank you
I appreciate your comments as I didn't clock that for some reason.

Yes I updated to 1.2.4 and for some reason saw 1.3 as 1.2.3

Thank you so much.

Russell