Arduino Forum

Products => Nano Boards (NEW types) => Nano Every => Topic started by: kronimiciad on Sep 16, 2020, 09:09 pm

Title: Sketches Can't Upload to Factory-Fresh Nano Every
Post by: kronimiciad on Sep 16, 2020, 09:09 pm
Hey folks, first-time builder here.  I just got my Arduino Nano Every in the mail, and I'm trying to upload a modified version of the blink example to my new brand-new board.  However, every time I try to upload a sketch, the IDE just spins its wheels for around 5 minutes before giving up.  I've been trying to look through similar questions and haven't found anything that has solved my issue.  My OS is Windows 10.

Here's a snippet of the log (I've turned on verbose reporting for compilation and upload):
Quote
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano Every, None (ATMEGA4809)"

Forcing reset using 1200bps open/close on port COM1

         Using Port                    : COM1
         Using Programmer              : jtag2updi
         Overriding Baud Rate          : 115200
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
avrdude: jtagmkII_getsync(): sign-on command: status -1
An error occurred while uploading the sketch
Here are the settings I'm currently using:

Here's what I've tried so far:

Any help would be very much appreciated.  I'm about to give up and just return the board and swap it for a different one.
Title: Re: Sketches Can't Upload to Factory-Fresh Nano Every
Post by: pert on Sep 17, 2020, 01:56 am
When you open the Arduino IDE's Tools > Port menu, does it say "COM1 (Arduino Nano Every)", or does it only say "COM1"?
Title: Re: Sketches Can't Upload to Factory-Fresh Nano Every
Post by: Juraj on Sep 17, 2020, 07:21 am
https://arduino.stackexchange.com/questions/78054/cant-upload-sketches-to-arduino-nano-every
Title: Re: Sketches Can't Upload to Factory-Fresh Nano Every
Post by: jojobaa on Sep 18, 2020, 02:58 pm
Hi, from what you explained it seems that the board is not being detected by the computer. You might want to check your device manager to see if the board is being recognized or not. Also, when you uninstalled the IDE did you make sure you deleted the Arduin15 folder.
Title: Re: Sketches Can't Upload to Factory-Fresh Nano Every
Post by: kronimiciad on Sep 18, 2020, 08:58 pm
When you open the Arduino IDE's Tools > Port menu, does it say "COM1 (Arduino Nano Every)", or does it only say "COM1"?
It only says "COM1".  There is no mention of the Every specifically.

https://arduino.stackexchange.com/questions/78054/cant-upload-sketches-to-arduino-nano-every
I posted this several places because responses can be slow, and each responder has a different, useful idea to try.  I'd run out of my own ideas, so I cast a wide net.

Hi, from what you explained it seems that the board is not being detected by the computer. You might want to check your device manager to see if the board is being recognized or not. Also, when you uninstalled the IDE did you make sure you deleted the Arduin15 folder.
The board does not seem to be recognized.  I posted my question on the Arduino subreddit (https://www.reddit.com/r/arduino/comments/iu2rw1/sketches_cant_upload_to_factoryfresh_nano_every/?utm_source=share&utm_medium=web2x&context=3), and it seems that perhaps the board is simply defective.  No unknown USB device is listed in my device manager and no new entry appears in the device manager when I connect the board.  As I've said, I have tried multiple USB cables and ports, and also tried it on two different Windows 10 computers.