Arduino Forum

Topics => Robotics => Topic started by: jaredpi on Dec 16, 2011, 01:59 am

Title: ISAAC 32 robotics system
Post by: jaredpi on Dec 16, 2011, 01:59 am
Hi,
I just got a used ISAAC 32 robotics system(http://www.ifirobotics.com/isaac-system-overview.shtml (http://www.ifirobotics.com/isaac-system-overview.shtml)) and have no idea how to use it.
All I know about it is that it is from the early to mid 90's and runs off of BASIC Stamp programming.
1) How do I attach it to a computer.
2) How do I declare the pins in the program.
3) How do I wire it.
4) What voltage does it runs on.
Any help is needed.
Thanks,
Jaredpi
Title: Re: ISAAC 32 robotics system
Post by: PaulS on Dec 16, 2011, 04:13 pm
Quote
and runs off of BASIC Stamp programming.

Then it probably doesn't have an Arduino in it.

Quote
1) How do I attach it to a computer.

Duct tape?

Quote
2) How do I declare the pins in the program.

What pins? What program?

Quote
3) How do I wire it.

Using some wire, most likely.

Quote
4) What voltage does it runs on.

Didn't you say that you were the one with the device?
Title: Re: ISAAC 32 robotics system
Post by: intermelt on Dec 17, 2011, 04:58 pm
By browsing to the link you posted I noticed that have a "reference guide"  It answers most if not all of your questions.  Once you review that and have questions on how to interface it with an Arduino I'm sure someone will be glad to help you.