Arduino Forum

General Category => General Discussion => Topic started by: RichardB_CAN on Apr 01, 2015, 10:42 am

Title: Sharing some Fritzing parts that I've made
Post by: RichardB_CAN on Apr 01, 2015, 10:42 am
Hello Everyone,

I've made some parts for Fritzing, and I figured I'd share them here.


Names and links:

NRF24L01+ Radio Transceiver Chip
https://code.google.com/p/fritzing/issues/detail?id=2753#c186 (https://code.google.com/p/fritzing/issues/detail?id=2753#c186)

FC-28 Soil Hygrometer Board + Probe
https://code.google.com/p/fritzing/issues/detail?id=2753#c187 (https://code.google.com/p/fritzing/issues/detail?id=2753#c187)

ENC28J60 Ethernet Breakout Board
https://code.google.com/p/fritzing/issues/detail?id=2753#c188 (https://code.google.com/p/fritzing/issues/detail?id=2753#c188)

BMP180 Barometer Breakout Board (GY-68)
https://code.google.com/p/fritzing/issues/detail?id=2753#c189 (https://code.google.com/p/fritzing/issues/detail?id=2753#c189)

Catalex MicroSD Breakout Module
https://code.google.com/p/fritzing/issues/detail?id=2753#c190 (https://code.google.com/p/fritzing/issues/detail?id=2753#c190)

BH1750FVI Breakout Board (GY-30)
https://code.google.com/p/fritzing/issues/detail?id=2753#c191 (https://code.google.com/p/fritzing/issues/detail?id=2753#c191)

TinyRTC DS1307 Breakout Board
https://code.google.com/p/fritzing/issues/detail?id=2753#c192 (https://code.google.com/p/fritzing/issues/detail?id=2753#c192)

Barometric Pressure Sensor Breakout - MPL115A1
https://code.google.com/p/fritzing/issues/detail?id=2753#c193 (https://code.google.com/p/fritzing/issues/detail?id=2753#c193)


I've checked them for errors, and everything seems okay when I use them. If something isn't right, feel free to let me know.


I'm also making some new parts - if you have a part in mind that you'd like to see, you can mention it here. The things I'll need to make the part are:

1. The name of the board/module
2. The outside dimensions in millimeters
3. Details about each pin (i.e. name -- e.g. VCC, GND, SDA)
4. An image of it at a reasonable resolution (as close to parallel as possible to the image plane -- that is, the edges of the board should be straight in the image)


I hope the parts are useful to you.


-Richard

P.S. If this should be posted in another subforum, please let me know which one.

P.P.S. Feel free to let me know of what projects you use the parts in (http://omnigatherum.ca/wp/?p=6#comments). Thanks.
Title: Re: Sharing some Fritzing parts that I've made
Post by: q2dg on Apr 07, 2015, 08:38 pm
Ouuuh yeahhh!!!
Thanks a lot!!
Title: Re: Sharing some Fritzing parts that I've made
Post by: Rapid_BR on Apr 08, 2015, 04:44 pm
Gratters! This is art  :D
Title: Re: Sharing some Fritzing parts that I've made
Post by: RichardB_CAN on Apr 09, 2015, 07:47 am
Ouuuh yeahhh!!!
Thanks a lot!!

Gratters! This is art  :D
Thanks. I hope you find the parts useful.



(If you'd like, you can leave a comment here about how you've used them: http://omnigatherum.ca/wp/?p=6#comments (http://omnigatherum.ca/wp/?p=6#comments))
Title: Re: Sharing some Fritzing parts that I've made
Post by: bjorkselbow on Mar 27, 2016, 12:41 am
Hi you wouldn't be able to tell me where I can find the FC-28 Soil Hygrometer part, Your link redirects me to the fritzing github and I can't seem to find it there.
Title: Re: Sharing some Fritzing parts that I've made
Post by: ChrisTenone on Mar 27, 2016, 10:52 am
Redirecting all incoming links to a portal page is dissing their users.
Title: Re: Sharing some Fritzing parts that I've made
Post by: Umberto73 on Mar 28, 2018, 08:15 am
Hi Richard,

many compliments for Your work :-)
I need a favour: can You share me the Fritzing Component of the BE40 module?
I saw It in the image You've posted; i mean the light sensor with screw potentiometer.

Thanks in advance, Umberto :-)
Title: Re: Sharing some Fritzing parts that I've made
Post by: AlexKite on Aug 04, 2018, 10:49 am
Hi Richard,

The link to TinyRTC DS1307 Breakout Board didn't work - please update!