Arduino Forum

General Category => General Discussion => Topic started by: kiman26 on Jul 16, 2016, 03:54 pm

Title: Arduino Mega 2560 To breadboard
Post by: kiman26 on Jul 16, 2016, 03:54 pm
Hello,

I would like to make my Arduino project based on Mega 2560 to an Breadboard for prototyping like this exemple with Arduino UNO :

http://digitaljunky.io/how-to-turn-an-arduino-based-proof-of-concept-into-a-final-prototype/ (http://digitaljunky.io/how-to-turn-an-arduino-based-proof-of-concept-into-a-final-prototype/)

the circuit "Mega2560" is so small that it must add an expander or some thing like that for to be able to fit it into a breadboard !.

Thx.
Title: Re: Arduino Mega 2560 To breadboard
Post by: kiman26 on Jul 18, 2016, 09:01 pm
UP !
Title: Re: Arduino Mega 2560 To breadboard
Post by: CrossRoads on Jul 18, 2016, 09:50 pm
Something like this?
http://www.crossroadsfencing.com/BobuinoRev17/ (http://www.crossroadsfencing.com/BobuinoRev17/)
(http://www.crossroadsfencing.com/BobuinoRev17/2560%20assembled%20front.jpg)
(http://www.crossroadsfencing.com/BobuinoRev17/2560%20assembled%20back.jpg)
Title: Re: Arduino Mega 2560 To breadboard
Post by: kiman26 on Jul 19, 2016, 05:32 pm
Thx CrossRoads for your help,

But how i can use this card with a classic breadboard ?! "I mean solderless"

(http://www.tweaking4all.com/wp-content/uploads/2013/12/smaller_arduino_breadboard.jpg)
Title: Re: Arduino Mega 2560 To breadboard
Post by: Robin2 on Jul 19, 2016, 07:49 pm
The problem with the Atmega 2560 is that it has an awful lot of pins so you would need a loooong breadboard.

I guess you could make an adapter between @CrossRoads' board and a linear pin layout with some veroboard and a lot of patience.

...R
Title: Re: Arduino Mega 2560 To breadboard
Post by: kiman26 on Jul 21, 2016, 12:24 am
Ok Thank you for your help :)