Arduino Forum

Products => Create => IoT Cloud Beta => Topic started by: rbhasegawa on Mar 15, 2019, 07:29 pm

Title: MKR1000: "We were unable to upload the Crypto Chip configuration code to..."
Post by: rbhasegawa on Mar 15, 2019, 07:29 pm
Hi all,

Just received my MKR1000 and am trying to configure the crypto chip. However, while using Arduino Create to configure the new board I am unable to upload the crypto chip configuration to my board. I have tried the suggested steps, the final step being posting to the forum.

Any Suggestions?

Thank you!
Title: Re: MKR1000: "We were unable to upload the Crypto Chip configuration code to..."
Post by: Mahmood_Lah on Mar 17, 2019, 04:54 pm
I have exactly the same problem. I would appreciate if you could help us.
Title: Re: MKR1000: "We were unable to upload the Crypto Chip configuration code to..."
Post by: endorama on Mar 18, 2019, 09:10 am
Hello,

can you please add details on what steps did you take? Please add also the full error that is printed out.

Thank you.
Title: Re: MKR1000: "We were unable to upload the Crypto Chip configuration code to..."
Post by: jomoengineer on Mar 21, 2019, 06:21 am
You may try updating the Firmware on the MKR1000 if you have not done so already.

This is done with the Arduino installed on a Desktop.

Download the latest WiFi101 from GitHub:
https://github.com/arduino-libraries/WiFi101 (https://github.com/arduino-libraries/WiFi101)

Follow the instructions from the following:
https://www.arduino.cc/en/Tutorial/FirmwareUpdater (https://www.arduino.cc/en/Tutorial/FirmwareUpdater)
Title: Re: MKR1000: "We were unable to upload the Crypto Chip configuration code to..."
Post by: jomoengineer on Mar 25, 2019, 06:49 am
I just had this issue with a second older MKR1000 and solved it by double pressing the RST button, uploading the Blink example then tried the ADD NEW BOARD and the Crypto Chip config worked.

Prior to this I did update the Firmware on the board.