Go Down

Topic: will pay for the code for my project (Read 2592 times) previous topic - next topic

xtr33m

first iam new to arduino and made small project to measure the temp via DS18B20 and log the data on exosite

this is the project

https://support.exosite.com/hc/en-us/articles/200095738-Arduino-Basic-Temperature-Monitor

now i like to add another DS18B20 and DH11 and to send that data to exosite

and i need help on the code and circuit diagram

can pay 5-10$ via paypal

please PM me if can make that for me

MrsCrossRoads

I'm not interested in the gig, but if you look here
https://github.com/exosite-garage/fluid_simple_cloud/blob/master/fluid_simple_cloud.ino
it seems as though all you have to do is give each data source a unique resource name. In the case of this example, there are three "temp", "onoff", and "1". In your case, you would have a "temp1" and "temp2" and so on.

One wire is a bus. Each device has a unique ID code. Wire the temperature sensors or other 1-wire devices in parallel. No additional pull-up resistor required.

What you are asking for is more than a $10 effort unless you already have an equivalent system set up and I don't.

hotdog

Do you mean you need something like this?

https://www.youtube.com/watch?v=EVw6EHp7IM4&list=UUV64ZOAPDUXgsCr1f5dJaaQ

You can email me to help you at  WAMKIDS@YAHOO.com

Go Up