Go Down

Topic: Arduino Mega 2560 To breadboard (Read 2164 times) previous topic - next topic

kiman26

Hello,

I would like to make my Arduino project based on Mega 2560 to an Breadboard for prototyping like this exemple with Arduino UNO :

http://digitaljunky.io/how-to-turn-an-arduino-based-proof-of-concept-into-a-final-prototype/

the circuit "Mega2560" is so small that it must add an expander or some thing like that for to be able to fit it into a breadboard !.

Thx.


CrossRoads

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

kiman26

Thx CrossRoads for your help,

But how i can use this card with a classic breadboard ?! "I mean solderless"


Robin2

The problem with the Atmega 2560 is that it has an awful lot of pins so you would need a loooong breadboard.

I guess you could make an adapter between @CrossRoads' board and a linear pin layout with some veroboard and a lot of patience.

...R
Two or three hours spent thinking and reading documentation solves most programming problems.

kiman26


Go Up