Go Down

Topic: Simple web server for led control (Read 13059 times) previous topic - next topic


I am looking to learn some Arduino web with ethernet shield. I compiled a few web pages with monitor temp, time etc. But I would like to find a really simple post or get example to light an led or two. I have the fancy (read ajax) graphic lighted led one running but appear too much for me to learn why it works.

Any suggestion for simple form base code. Maybe commented  :smiley-mr-green:
16 Mhz Arduino.... 8 times bigger then an Altair 8800 :)!


The below might be of interest.

Google forum search: Use Google Search box in upper right side of this page.
Why I like my 2005 Rio Yellow Honda S2000  https://www.youtube.com/watch?v=pWjMvrkUqX0


Also, remember the examples folder on the Arduino IDE, this has a load of examples for the ethernet shield.

Its a lot easier to take one of the examples and modify it to do what you want, than to start from scratch.
I write books about Arduino and Electronics: http://simonmonk.org


Is there a playground example of an http (get or post)?
If not if I every figure this out I'll try to submit it for the Playground.

BTW How do we submit an item to the playground?
16 Mhz Arduino.... 8 times bigger then an Altair 8800 :)!

Go Up