Go Down

Topic: Running a pressure transducer, flow meter sensor, and an SD card on ONE ARDUINO (Read 1 time) previous topic - next topic

31paige

I have been searching the web for many hours for help and trying to find help on this subject.

I am currently working on a project where I would like to run one (or two) pressure transducers, an SD card data logger, and a flow sensor meter to help me record data for a water pump. Is this possible to run all of these components at the same time on one arduino? I do not know how the coding would need to be set up but any help (confirmation that this is possible) would be great.

 Attached are pictures of the pressure transducer, SD card data logger, and the flow rate sensor meter.


Thank you!

wvmarle

Sounds totally viable to me.
Get them working one by one, then integrate into a whole.
Quality of answers is related to the quality of questions. Good questions will get good answers. Useless answers are a sign of a poor question.

jimlee2


cedarlakeinstruments

It's completely possible and not particularly complex to implement.
What are you trying to do that can't be accomplished with an off the shelf data logger, though?
Electronics and firmware/software design and assistance. No project too small

31paige

@cedarlakeinstruments  I am trying to record all pressure & flow rate data on an SD card. Any ideas on how I can start this?



Thank you

wvmarle

Quality of answers is related to the quality of questions. Good questions will get good answers. Useless answers are a sign of a poor question.

cedarlakeinstruments

Electronics and firmware/software design and assistance. No project too small

wvmarle

#5 was a reply to the question of #4.

If you want more specific answers, you have to ask more specific questions.
Quality of answers is related to the quality of questions. Good questions will get good answers. Useless answers are a sign of a poor question.

cedarlakeinstruments

Electronics and firmware/software design and assistance. No project too small

wvmarle

It's too confusing when everyone is starting to ask questions to everyone else...
Quality of answers is related to the quality of questions. Good questions will get good answers. Useless answers are a sign of a poor question.

Go Up