Hi
I have a problem with my Genuino ZERO
I am working with IDE 1.8.5 on Linux UBUNTU
I compile a simple sketch, as an example: BLINK, it refuses to upload through the Programming port.
I selected:
Board:
Arduino/Genuino Zero (Programming Port)
Port:
/dev/ttyACM0/Arduino/Genuino Zero (Programming Port)
Programmer:
Atmel EDGB
It returns the following errore message:
Arduino: 1.8.5 (Linux), Board: "Arduino/Genuino Zero (Programming Port)"
/home/maris/bin/arduino-1.8.5/arduino-builder -dump-prefs -logger=machine -hardware /home/maris/bin/arduino-1.8.5/hardware -hardware /home/maris/.arduino15/packages -tools /home/maris/bin/arduino-1.8.5/tools-builder -tools /home/maris/bin/arduino-1.8.5/hardware
Using board 'arduino_zero_edbg' from platform in folder: /home/maris/.arduino15/packages/arduino/hardware/samd/1.6.15
Using core 'arduino' from platform in folder: /home/maris/.arduino15/packages/arduino/hardware/samd/1.6.15
Generating function prototypes...
Compiling sketch...
Compiling libraries...
Compiling core...
Using previously compiled file: /tmp/arduino_build_44982/core/variant.cpp.o
Using precompiled core
Linking everything together...
Open On-Chip Debugger 0.9.0-g932ec70 (2017-02-15-11:32)
Licensed under GNU GPL v2
An error occurred while uploading the sketch
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
Info : only one transport option; autoselect 'swd'
adapter speed: 500 kHz
adapter_nsrst_delay: 100
cortex_m reset_config sysresetreq
Error: unable to open CMSIS-DAP device 0x3eb:0x2157
Error: No Valid JTAG Interface Configured.
In practice It seems the IDE is not able to connect to the board.
I google on the web that this kind of problem could be caused by a corruption of the bootloader, so I attempted at reloating the bootloaded.
This is the result:
Arduino: 1.8.5 (Linux), Board: "Arduino/Genuino Zero (Programming Port)"
http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
Info : only one transport option; autoselect 'swd'
adapter speed: 500 kHz
adapter_nsrst_delay: 100
cortex_m reset_config sysresetreq
Error: unable to open CMSIS-DAP device 0x3eb:0x2157
Error while burning bootloader.
Do you have any suggestion about this? :o
Or do I have to consider my board dead and good to be trashed out?
Thank you very much
Michele