Go Down

Topic: Really having difficulty connecting to my Yun Console.  (Read 577 times) previous topic - next topic


I can't seem to connect to the Yun console.  I have tried any of the sketeches and had no luck. I get errors ranging from auth issues to io exceptions.

The sketch below generates an io exception

 Console ASCII table for YunShield/Yún
 Prints out byte values in all possible formats:
 * as raw binary values
 * as ASCII-encoded decimal, hex, octal, and binary values

 For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII

 The circuit:
 - YunShield/Yún

 created 2006
 by Nicholas Zambetti
 modified 9 Apr 2012
 by Tom Igoe
 modified 22 May 2013
 by Cristian Maglie

 This example code is in the public domain.



#include <Console.h>

void setup() {
  //Initialize Console and wait for port to open:

  // Uncomment the following line to enable buffering:
  // - better transmission speed and efficiency
  // - needs to call Console.flush() to ensure that all
  //   transmitted data is sent


  while (!Console) {
    ; // wait for Console port to connect.

  // prints title with ending line break
  Console.println("ASCII Table ~ Character Map");

// first visible ASCIIcharacter '!' is number 33:
int thisByte = 33;
// you can also write ASCII characters in single quotes.
// for example. '!' is the same as 33, so you could also use this:
//int thisByte = '!';

void loop() {
  // prints value unaltered, i.e. the raw binary version of the
  // byte. The Console monitor interprets all bytes as
  // ASCII, so 33, the first number,  will show up as '!'

  Console.print(", dec: ");
  // prints value as string as an ASCII-encoded decimal (base 10).
  // Decimal is the  default format for Console.print() and Console.println(),
  // so no modifier is needed:
  // But you can declare the modifier for decimal if you want to.
  //this also works if you uncomment it:

  // Console.print(thisByte, DEC);

  Console.print(", hex: ");
  // prints value as string in hexadecimal (base 16):
  Console.print(thisByte, HEX);

  Console.print(", oct: ");
  // prints value as string in octal (base 8);
  Console.print(thisByte, OCT);

  Console.print(", bin: ");
  // prints value as string in binary (base 2)
  // also prints ending line break:
  Console.println(thisByte, BIN);

  // if printed last visible character '~' or 126, stop:
  if (thisByte == 126) {    // you could also use if (thisByte == '~') {
    // ensure the latest bit of data is sent

    // This loop loops forever and does nothing
    while (true) {
  // go on to the next character


It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.

Go Up