Go Down

Topic: SAMD21J18 & Arduino IDE (Read 365 times) previous topic - next topic

Vanovsky

Hi! Please help with my problem
I try to use samd21j18 with arduino IDE but have a problem.
After burning bootloader at the board it have some vid & pid (for bootloader mode). It works correctly.
But it does not work correctly when I upload any sketch into samd21J18 chip. Cause there are both vid & pid have strange values. My device can't turn into Native USB Mode.
There are samd21G18 & samd21J18 similar chips, they differs only peripherals. But I have no problems with samd21G18.
How to solve the problem with samd21J18?
Thanks!

Go Up