Go Down

Topic: differences between uploading sketches toanother boards (Read 180 times) previous topic - next topic

rcpilot_hun

Hi, Guys!

I use 3 different boards: NANO, WavGat UNO and WavGat MEGA 2560. In previous days I uploaded different sketches to UNO and to MEGA, and today I planned to test my BAROs - BMP180, BMP280.

I tried to upload the Basic BMP180 sketch, but the upload was not ready, the Ard IDE gave me error codes:

https://arduino.stackexchange.com/questions/17827/how-do-i-resolve-avrdude-stk500-recv-programmer-is-not-responding
https://arduino.stackexchange.com/questions/49107/avrdude-stk500-recv-programmer-is-not-responding-after-all-tries
https://arduino.stackexchange.com/questions/22191/avrdude-stk500-recv-programmer-is-not-responding
https://www.google.com/search?client=firefox-b-d&q=avrdude%3A+stk500_recv%28%29%3A+programmer+is+not+responding

I couldn't solved the problem, although I tested all possibilities in above homepages...

What do You think, what is the problem? May I dowload -install board driver of NANO? Or what?

Thanks: rcph

rcpilot_hun

driver update didn't solved this problem

https://www.youtube.com/watch?v=mDrV8b1E6zI
http://www.wch.cn/download/ch341ser_zip.html

pert

In previous days I uploaded different sketches to UNO and to MEGA
Were the uploads successful?

I tried to upload the Basic BMP180 sketch
Which board did you upload to?

the Ard IDE gave me error codes:

https://arduino.stackexchange.com/questions/17827/how-do-i-resolve-avrdude-stk500-recv-programmer-is-not-responding
https://arduino.stackexchange.com/questions/22191/avrdude-stk500-recv-programmer-is-not-responding
https://arduino.stackexchange.com/questions/22191/avrdude-stk500-recv-programmer-is-not-responding
https://www.google.com/search?client=firefox-b-d&q=avrdude%3A+stk500_recv%28%29%3A+programmer+is+not+responding
I'm glad to see you did some research on the issue, but we do need you to post the full error output here.

Please do this:
  • (In the Arduino IDE) File > Preferences
  • Uncheck the checkbox next to "Show verbose output during: compilation"
  • Check the checkbox next to "Show verbose output during: upload
  • Click "OK"
  • Sketch > Upload
  • After the upload fails, you'll see a button on the right side of the orange bar "Copy error messages" (or the icon that looks like two pieces of paper at the top right corner of the black console window in the Arduino Web Editor). Click that button.
  • In a forum reply here, click on the reply field.
  • Click the </> button on the forum toolbar. This will add the forum's code tags markup to your reply.
  • Press "Ctrl + V". This will paste the upload output between the code tags.
  • Move the cursor outside of the code tags before you add any additional text to your reply.



BMP180 teszt.txt
That file only contains the URL: https://learn.sparkfun.com/tutorials/bmp180-barometric-pressure-sensor-hookup-. It's pretty silly to make us download a file for something you could have posted directly to the forum.

rcpilot_hun

Hello, Pert!

Thank You very much the fast reply. Meantime I uploaded this sketch to my MEGA 2560, and this program is working:


avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\fgabor\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino14/etc/avrdude.conf"

         Using Port                    : COM4
         Using Programmer              : wiring
         Overriding Baud Rate          : 115200
         AVR Part                      : ATmega2560
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PA0
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    10     8    0 no       4096    8      0  9000  9000 0x00 0x00
           flash         65    10   256    0 yes    262144  256   1024  4500  4500 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : Wiring
         Description     : Wiring
         Programmer Model: AVRISP
         Hardware Version: 15
         Firmware Version Master : 2.10
         Vtarget         : 0.0 V
         SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9801 (probably m2560)
avrdude: reading input file "C:\Users\fgabor\AppData\Local\Temp\arduino_build_978547/BMP180_teszt.ino.hex"
avrdude: writing flash (8814 bytes):

Writing | ################################################## | 100% 1.36s

avrdude: 8814 bytes of flash written
avrdude: verifying flash memory against C:\Users\fgabor\AppData\Local\Temp\arduino_build_978547/BMP180_teszt.ino.hex:
avrdude: load data flash data from input file C:\Users\fgabor\AppData\Local\Temp\arduino_build_978547/BMP180_teszt.ino.hex:
avrdude: input file C:\Users\fgabor\AppData\Local\Temp\arduino_build_978547/BMP180_teszt.ino.hex contains 8814 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 1.06s

avrdude: verifying ...
avrdude: 8814 bytes of flash verified

avrdude done.  Thank you.

pert

Good news! Well, if you have any more problems uploading, feel free to come back with more information and we'll try to help out.

rcpilot_hun

Uncheck the checkbox next to "Show verbose output during: compilation"
Check the checkbox next to "Show verbose output during: upload

I made these. Pls wait, I try to upload again the sketch to the NANO...

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\fgabor\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino14/etc/avrdude.conf"

         Using Port                    : COM4
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x64
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x64

avrdude done.  Thank you.

Probléma az alaplapra feltöltéskor.

pert

Try selecting Tools > Processor > ATmega328P (Old Bootloader) and then upload again.

rcpilot_hun

THAAAAAAAAAAAAAAAAAAAAAAAAANKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!! :):):)

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\fgabor\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino14/etc/avrdude.conf"

         Using Port                    : COM4
         Using Programmer              : arduino
         Overriding Baud Rate          : 57600
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : Arduino
         Description     : Arduino
         Hardware Version: 2
         Firmware Version: 1.16
         Vtarget         : 0.0 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file "C:\Users\fgabor\AppData\Local\Temp\arduino_build_406746/BMP180_teszt.ino.hex"
avrdude: writing flash (8508 bytes):

Writing | ################################################## | 100% 2.47s

avrdude: 8508 bytes of flash written
avrdude: verifying flash memory against C:\Users\fgabor\AppData\Local\Temp\arduino_build_406746/BMP180_teszt.ino.hex:
avrdude: load data flash data from input file C:\Users\fgabor\AppData\Local\Temp\arduino_build_406746/BMP180_teszt.ino.hex:
avrdude: input file C:\Users\fgabor\AppData\Local\Temp\arduino_build_406746/BMP180_teszt.ino.hex contains 8508 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 1.86s

avrdude: verifying ...
avrdude: 8508 bytes of flash verified

avrdude done.  Thank you.

pert

You're welcome. I'm glad to hear it's working now. Enjoy!
Per

Go Up