Go Down

Topic: Cant upload to my Arduino Uno (Read 716 times) previous topic - next topic


I get this error message when i try to upload the 'hello world':

Binary sketch size: 2652 bytes (of a 32256 byte maximum)
C:\Users\Am\Downloads\arduino-0022\arduino-0022\hardware/tools/avr/bin/avrdude -CC:\Users\Am\Downloads\arduino-0022\arduino-0022\hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P\\.\COM4 -b115200 -D -Uflash:w:C:\Users\Am\AppData\Local\Temp\build5082855271981312750.tmp\HelloWorld.cpp.hex:i

avrdude: Version 5.4-arduino, compiled on Oct 11 2007 at 19:12:32
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         System wide configuration file is "C:\Users\Am\Downloads\arduino-0022\arduino-0022\hardware/tools/avr/etc/avrdude.conf"

         Using Port            : \\.\COM4
         Using Programmer      : stk500v1
         Overriding Baud Rate  : 115200
avrdude: ser_open(): setting dtr
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Recv:
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: Send: Q [51]   [20]
avrdude: Recv:
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

avrdude done.  Thank you.

Go Up