Go Down

Topic: ATmega644 help ? (Read 809 times) previous topic - next topic

flak88

Recently bought a blank ATmega644 I want to use a ATmega328 to burn the bootloader on it so i can use it with ardunio IDE  1.0+ .After looking at
http://www.gammon.com.au/forum/?id=11635 on how to do this i cant find a pathetic guide on how to do this for a  ATmega644.Any ideas ?

Thx

ReSiStAnCe


Recently bought a blank ATmega644 I want to use a ATmega328 to burn the bootloader on it so i can use it with ardunio IDE  1.0+ .After looking at
http://www.gammon.com.au/forum/?id=11635 on how to do this i cant find a pathetic guide on how to do this for a  ATmega644.Any ideas ?

Thx


It's actually on the same website..http://www.gammon.com.au/forum/?id=11637
Just follow the guide for the ATMega1284p, about 70% down on the page. The pinout for MISO, MOSI, SCK and RST are the same for the 644.

johnwasser

You will need an ATmega644p bootloader.  The Sanguino is a 644p Arduino clone so they probably have one you can use:  http://sanguino.cc/
Send Bitcoin tips to: 1G2qoGwMRXx8az71DVP1E81jShxtbSh5Hp
See who has no social life: https://forum.arduino.cc/index.php?action=stats :)

Go Up