Long range wireless reciever with Arduino

[Albann]

Hi!

I have a business with 1 gbps internet optical fiber and is 738 m (2421.26 ft) away from my house. Is there any way i can make a connection with Arduino and long range WiFi module or something who work with Arduino.

I have Arduino Uno board, do i need another board?
What WiFi module is used for this connection?
If there is a way to do this, will be my internet speed lower?

I cant buy another internet connection, because it will cost me more and i wont use it too much.

Thanks!

[Paul_KD7HB]

Can we assume you can see the business building from your house?

Paul

[Albann]

Yes, no tree or big buildings.

Thanks for reply!

[mauried]

Its hard to do if you dont want to lose speed.
There are commercial products that can do this but they arnt cheap.
eg https://3gstore.com/product/4601_long_range_ethernet_bridge_kit.html

Otherwise you could do something like this with an Arduino using an Ethernet shield, and a cheap bi directional radio like a HC12 or a Lora radio, and a Slip library like this.
https://playground.arduino.cc/Code/SerialIP.

However, this method will be SLOW, and I really mean SLOW.
You may get 56 kbps if you are lucky.

[Albann]

Its hard to do if you dont want to lose speed.
There are commercial products that can do this but they arnt cheap.
eg https://3gstore.com/product/4601_long_range_ethernet_bridge_kit.html

I can buy it but will cost me more for shipping because i do not live in US

Otherwise you could do something like this with an Arduino using an Ethernet shield, and a cheap bi directional radio like a HC12 or a Lora radio, and a Slip library like this.
https://playground.arduino.cc/Code/SerialIP.

However, this method will be SLOW, and I really mean SLOW.
You may get 56 kbps if you are lucky.

In robot project i made i used 2xHC-12 but they are for indoor use most!

Can i make this connection with a parabolic antenna or yagi antenna?

[srnet]

In robot project i made i used 2xHC-12 but they are for indoor use most!

Can i make this connection with a parabolic antenna or yagi antenna?

That wont help increase the speed beyond circa 50Kbps with either a Arduino HC12 or LoRa setup. 

[Albann]

Is there any way to realize this connection, i mean with arduino of course?

Thank for reply!

[mauried]

Not if you want a fast connection, as the speed limitation will be the radios that can make the distance.
The only other option I can think of is a pair of NRF24l01 radios which are specifically designed for serial comms.
Like this.
https://www.openimpulse.com/blog/products-page/product-category/stc15l204-nrf24l01-uart-serial-wireless-module/

You can push nrf24l01s to around 900 kbs, BUT the range you cant guarantee
even with better antennas.