Servos and Buttons

Projects Discussion and Showcase Robotics
3

Simple servo button code. Stick a wire in the board ground pin socket, and then touch the other end of the wire to pin 4 and pin 5.

//zoomkat servo button test 12-29-2011

#include <Servo.h>
int button1 = 4; //button pin, connect to ground to move servo
int press1 = 0;
int button2 = 5; //button pin, connect to ground to move servo
int press2 = 0;
Servo servo1;

void setup()
{
  pinMode(button1, INPUT);
  pinMode(button2, INPUT);
  servo1.attach(7);
  digitalWrite(4, HIGH); //enable pullups to make pin high
  digitalWrite(5, HIGH); //enable pullups to make pin high
}

void loop()
{
  press1 = digitalRead(button1);
  if (press1 == LOW)
  {
    servo1.write(170);
  }    
  
  press2 = digitalRead(button2);
  if (press2 == LOW)
  {
    servo1.write(10);
  }
}