Go Down

Topic: Using an Arduino as an AVR ISP Example Clarification (Read 945 times) previous topic - next topic


I am using an Uno for both the programmer and the target.  This example notes that if you are using an Uno, you need to add a 10 uF capacitor between reset and ground.  I cannot discern if the programmer or the target requires this capacitor.  Anyone know?

Many Thanks.   



Thanks for clearing that up.  If you use an Arduino Ethernet as the programmer is a capacitor also required?


I used many times an Arduino Uno as ISP programmer (I followed the instructions from here: http://pdp11.byethost12.com/AVR/ArduinoAsProgrammer.htm ) and I have never needed a capacitor. I will try to put one to see if there is some change, some improvement.

Go Up