Arduino UNO Pinout Diagram

[ichilton]

Does anyone have a copy of these?

Thanks,

Ian

[ichilton]

Ah! - it seems they are available here: http://pighixxx.tumblr.com/

[nid69ita]

Does anyone have a copy of these?
Thanks, Ian

First post, there is a zip file

[Henry_Best]

Does anyone have a copy of these?
Thanks, Ian

First post, there is a zip file

No there isn't. They're all dead links.

[nid69ita]

Does anyone have a copy of these?
Thanks, Ian

First post, there is a zip file

No there isn't. They're all dead links.

Oh, sorry. There is a zip but in Italian section: a top, where you read EDIT BY MOD, the first link:
http://forum.arduino.cc/index.php?topic=151646.msg1138645#msg1138645

[pighixxx]

After a long time I came back. 
I'm redrawing all cards with a new graphics. For those who follow me on twitter is not news!
Here the pinout of UNO

http://t.co/MKtmCILSdj

and ATMEGA328 processor

http://t.co/CdmDbWTWTf

[GoForSmoke]

MUCH Appreciated!
Karma to you! Perhaps others will follow suit.

[pighixxx]

Thanks!

[NicoHood]

That looks great!
One thing i would change: Could you please turn the 16u2's ISP header the way its on the PCB so people know exactly where the Reset etc is?
I like that you even describe the 16u2's pins. Another cool thing would be to write on what ports the Serial, Tx/RX leds and the DTR(Reset) from the 16u2 are.
Regarding to my new Hoodloader v2 project (which makes the 16u2 Arduino IDE compatible like a Leonardo/Teensy; cdc bootloader + usbserial) this would be very nice. Would it then be okay to integrate this picture in my readme? Current project (v2 is under development) https://github.com/NicoHood/Hoodloader

[spicetraders]

Trying to get to the YUN file but keep getting the download page.  But it just says niftily "please be patient".
How can I get to the YUN file.

Thank You

[pighixxx]

@spicetraders

Hi,
the link is http://pighixxx.com/yunpdf.pdf

[pighixxx]

Finally, the website is online 
http:///www.pighixxx.com

[Henry_Best]

The ProMini pinout has a wrong label. 
Pin 11 at the end is marked RST (reset) when it should be RTS (ready to send).

[nickgammon]

Very nice. For consistency the SCK pin of the two ICSP headers should be the same. You have one as SCLK and the other as SCK. I think SCK is what is usually used.

[nickgammon]

For the Uno, I'm not quite following your "port power" symbols. There are ports PB, PC and PD, but you only have two colours (red and yellow).

You have RESET in two places and /RESET in one place. Again for consistency it should probably be /RESET in all three places.

Can I suggest a different symbol for the PWM pin? You have something that looks like a sine wave, but really a square wave with a non-symmetric (ie. not 50%) duty cycle would be closer to the mark.