ARDUINO 1.8.9 2019.03.15[ide]* New target! ARM64 boards are now fully supported (Nvidia Jetson and RaspberryPi3 with 64bit operating system)* Fix UTF8 related bugs on Windows* Fixed: can now compile again using OpenJDK (removed dependency on JavaFx)* Fixed: only use touchBar on OSX 10.12 or higher* PluggableDiscovery: easily add your own discoverer and make it available in Boards/Port menu (thanks @PaulStoffregen for the idea and the initial implementation)* LibManager: reduce slowdown when searching* Fixed: ensure a sketch line is visible when it contains an error and must be highlighted* Linux: the installer now tries to install a symlink is /usr/local/bin (this doesn't affect usual non-systemwide installation) Thanks @2E0PGS[wifi-updater]* Fix firmware upgrade not being available for 3rd party WINC boards[arduino-builder]* Use lexicographic distance as last chance to spot the right library (if every other tecnique failed)* Fix some prototypes being inserted in the middle of a functionARDUINO 1.8.8 2018.12.07[ide]* Fixed: command line parsing of version parameters when installing cores/libraries* Platform indexes are now downloaded using https* Fixed: on some newer linux distributions, NPE when loading GTK look-and-feel without libgtk2 installed* MacOSX: added touch bar support* MacOSX: do not exit app after closing last window* Fixed: serial monitor timestamps not always printed. Thanks @nitram509* Kill active programmer if still alive after closing last IDE window* Fixed: "Export compiled binary" now works also with unsaved sketches* Improved automatic port re-selection after upload* Added scroller to "INCOMPATIBLE" examples menu[wifi-firmware]* Added firmware upgrade for NINA-based boardsARDUINO 1.8.7 2018.09.11(bugfix service release)[ide]* Fixed: IDE doesn't start if library_index.json is corrupted.* Fixed: IDE doesn't start if a library with invalid version is found.* Fixed: Rare build errors in very complex sketches (like Marlin firmware).* Fixed: Better dialog explaining that MacOSX 10.8 is now required. Thanks @PaulStoffregen* Fixed: Slow "File" and "Tools" menus in MacOSX* Fixed: Weird Board Manager behaviour if AVR core is downgraded to a version earlier than 1.6.22* Improved first-use usability if the user don't select the serial port. Thanks @PaulStoffregen* Custom "Tools" menu now keeps the order as defined in boards.txt.[core]* AVR: Fixed EEPROM warnings. Thanks @bxparks* AVR: Treat "narrowing conversion" as warning, not error. This will make some libraries to compile again. Thanks @PaulStoffregen
ARDUINO 1.8.6 2018.08.23[ide]* Updated arduino-builder to 1.4.0: - parallel build (improve compile speed) - better reuse of already compiled files - Windows: fixed build for sketch stored under OneDrive cloud folders* Added translations for library types. Thanks @ReAlUA* Added scroller in programmers menu.* Added "accelerator" in scrollable menu, press "a" key while scrolling* Keep "Board Manager" menu item always as first in the menu* "Manage Libraries" is now also in the "Tools" menu. Thanks @feikname* Compiler errors now have both column and line* Serial monitor how has "Show Timestamp" option. Thanks @MichalSy* Improved DPI detection for hi-resolution montior on Linux* Added copy/paste contextual menu in Find/Replace text fields* Fixed long IDE startup time when some virtual/not-connected network interfaces are present* Fixed inconsistent line-endings when saving files on Windows* mdns: Make board disappear via TTL instead of reachability. Thanks @kurtgo* Library Manager: display install/remove buttons with mouse on-hover instead of mouse click* Board Manager: fixed some rare case with corrupted index download* Windows: removed some debug output when running the IDE from command line* Support selectable user-defined themes. User's theme are zip files inside the sketchbook "theme" folder* Library Manager: library search now search also for headers (.h) declared by the library in library.properties* Added "--version" to the CLI. Thanks @yohsuke* Fixed Serial Plotter/Monitor permanently disabled if Plotter fails to open* Fixed window title that sometimes is not updated on "Save as...". Thanks @JxJxJxMxNxS* Fixed keybindings for Increase/Decrease font size* Improved accessibility in the Preferences dialog. Thanks @coreyknapp[core]* AVR: Set Optiboot as default bootloader for Nano. This is the bootloader installed on new Arduino Nano boards. If you have a Nano with the old bootloader you must select Tools > Processor > ATmega328P (Old Bootloader) to upload.* AVR core has been moved to its own repository: https://github.com/arduino/ArduinoCore-avr* Updated toolchain to gcc 5.4.0[wifi101-firmware]* SECURITY FIX: Released fix for WPA2 KRACK vulnerability (latest WINC1500 firmware 19.5.2).
ARDUINO 1.8.5 2017.09.29(bugfix service release)[ide]* Added workaround for menu visibility bug in MacOSX 10.13 beta. Thanks @puybaret* Fixed bug for negative-font-size.* New/Rename tabs now allows names starting with a number.
ARDUINO 1.8.4 2017.08.23[ide]* IDE Toolbar can now go full width on 4K display.* Environment variable LIBRARY_INDEX_URL is now correctly parsed (LIBRARY_INDEX_URL_GZ can also be optinally specified). Thanks @xardael* Added per-board generic option in config file boards.txt for disabling control of dtr+rts. Thanks @d-a-v* CLI: fixed missing "runtime.platform.path" when running without the `--board` option* Linux: fixed desktop icon not launching the IDE in certain Window Managers (thanks @herrold)* Allow setting low values for console size (correctly applies console.lines=x in preferences.txt)* Make Preference window fit 600px height displays* Fix error when renaming an unsaved, newly added file. Thanks @matthijskooijman* Added the ability to increase/decrease font size via keyboard + mouse shortcuts (Ctrl + MouseWheel)* Sketch names starting with a digit are now allowed* Serial monitor is opened on a default position if the multi-monitor setup change (this should fix cases when the serial monitor is opened outside of the visibile space)[libraries]* Fixed wrong folder name for "Adafruit Circuit Playground" library, now it can be updated cleanly.* Fixed wrong include for "RobotIRRemote", now it should not interfere anymore with the real IRRemote.
ARDUINO 1.8.3 2017.05.31(bugfix service release)[ide]* Fixed RESOURCE_NAME in install.sh script* Serial Monitor: added "Clear output" button. Thanks @MichaelSy* added options in preferences.txt for: custom title, comment/uncomment shortcut, always show file extensions. Thanks @MichaelSy* added options in preferences.txt to enable/disable typing assistance (auto close brace, auto indent)* Enabling "Use external editor" option now requires to save all sketches.[core]* AVR: added availableForWrite() method in generic Stream class. Thanks @eric-wieser* AVR: moved flush() method up in the class hierarchy from Stream to Print class. Thanks @matthijskooijman[other]* Update Wifi101 Firmware Updater plugin
Aggiungo che, secondo me, le versione precedenti alla 1.0 dovrebbero essere considerate ormai deprecate.
Ma da quando ci fu quel problema con il menu a tendina di selezione della velocità seriale dell'IDE
uhmm in teoria la begin la dovresti chiamare una volta, e poi il resto sono server.available()..QUETSO! -----> Fixed malloc bug <------ è il vero bug fix della versione
QUETSO! -----> Fixed malloc bug <------ è il vero bug fix della versione
Quote from: lesto on Mar 11, 2013, 06:30 pm QUETSO! -----> Fixed malloc bug <------ è il vero bug fix della versioneOpinione personale, usare la malloc su un sistemino basato su una modesta mcu 8 bit con 2k di ram è come pestarsi le dita con una mazza da 5 kg