Go Down

Topic: Control two servo simultaneously? (Read 1 time) previous topic - next topic

ttttkk

Hi, my question is that. Can I control 2 servos simultaneously? I mean while one servo is spinning continuously, can I still control another servos' rotation and speed?

Because if a spinning servo is controlled only by for-loop as in the example, it seems impossible to do other things at the same time, or is it?


Thank you!

MAS3

Yes you can.
(I don't think you can control the speed, but you can control the steps)
You'd have to approach it like "blink without delay".
If you got the concept of that, this should be possible too.
So set a value, but don't wait for that value to be reached.
Instead of that do some other things, and check if your value has been reached in the meantime (which is no difference from the for-next loop).
I guess you need to divide your sketch in sections and switch between them.
Do not use any delays except for debugging purposes.
Of course you will not be controlling both simultane, but you'll switch controlling them quite fast so they seem te be controlled at the same time.
Have a look at "blink without delay".
Did you connect the grounds ?
Je kunt hier ook in het Nederlands terecht: http://arduino.cc/forum/index.php/board,77.0.html

zoomkat

Multiservo test code.

Code: [Select]

//zoomkat 11-22-12 simple delimited ',' string parse
//from serial port input (via serial monitor)
//and print result out serial port
//multi servos added

String readString;
#include <Servo.h>
Servo myservoa, myservob, myservoc, myservod;  // create servo object to control a servo

void setup() {
  Serial.begin(9600);

  //myservoa.writeMicroseconds(1500); //set initial servo position if desired

  myservoa.attach(6);  //the pin for the servoa control
  myservob.attach(7);  //the pin for the servob control
  myservoc.attach(8);  //the pin for the servoc control
  myservod.attach(9);  //the pin for the servod control
  Serial.println("multi-servo-delimit-test-dual-input-11-22-12"); // so I can keep track of what is loaded
}

void loop() {

  //expect single strings like 700a, or 1500c, or 2000d,
  //or like 30c, or 90a, or 180d,
  //or combined like 30c,180b,70a,120d,

  if (Serial.available())  {
    char c = Serial.read();  //gets one byte from serial buffer
    if (c == ',') {
      if (readString.length() >1) {
        Serial.println(readString); //prints string to serial port out

        int n = readString.toInt();  //convert readString into a number

        // auto select appropriate value, copied from someone elses code.
        if(n >= 500)
        {
          Serial.print("writing Microseconds: ");
          Serial.println(n);
          if(readString.indexOf('a') >0) myservoa.writeMicroseconds(n);
          if(readString.indexOf('b') >0) myservob.writeMicroseconds(n);
          if(readString.indexOf('c') >0) myservoc.writeMicroseconds(n);
          if(readString.indexOf('d') >0) myservod.writeMicroseconds(n);
        }
        else
        {   
          Serial.print("writing Angle: ");
          Serial.println(n);
          if(readString.indexOf('a') >0) myservoa.write(n);
          if(readString.indexOf('b') >0) myservob.write(n);
          if(readString.indexOf('c') >0) myservoc.write(n);
          if(readString.indexOf('d') >0) myservod.write(n);
        }
         readString=""; //clears variable for new input
      }
    } 
    else {     
      readString += c; //makes the string readString
    }
  }
}

Google forum search: Use Google Search box in upper right side of this page.
Why I like my 2005 Rio Yellow Honda S2000  https://www.youtube.com/watch?v=pWjMvrkUqX0

Go Up