Go Down

Topic: iComSat v1.1 network login issue (Read 2955 times) previous topic - next topic


Hi there. My iComSat v1.1 shield doesn't seem to logon to the GSM network. The status LED is permanently on and the NET LED just flashes. What can be the problem? Thanks.


Oct 18, 2013, 03:29 pm Last Edit: Oct 18, 2013, 03:31 pm by bss34 Reason: 1
I had the same problem. I changed position of rx/tx jumpers from pin0 and pin1  to pin4 and pin5 (softserial, sketch is from Itead Studio). Now it works fine.

Go Up