Go Down

Topic: Part Numbers for the 7 I/O connectors on the Arduino DUE (Read 2939 times) previous topic - next topic


Hey, folks!

As you know, the Arduino DUE has 7 I/O connectors (Five 8 X 1s, One 10 X 1 and One 18 X 2)
The part numbers given on the schematic are:

I cannot find these part numbers on Digikey and other sources.
Does anyone here know the exact part numbers?

Please advise.

Bob N


I usually get them from pololu.com, much easier to find than at Digikey or Mouser

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up