Go Down

Topic: arduino uploading problem (Read 1 time) previous topic - next topic


hi reader,
             i am using arduino 1.0.5 and when I upload an example program is showing uploading done but a wring message avrdude: warning: cannot set sck period. please check for usbasp firmware update. ,i am using robotic controller m1 board ,the board is detected and the only problem is wen i upload blink example the same warning shows and says done uploading but do nothing :( i need help


Please check for usbasp firmware update.  Google can probably help with that.
Send Bitcoin tips to: 1G2qoGwMRXx8az71DVP1E81jShxtbSh5Hp

Go Up