Go Down

Topic: project (Read 2038 times) previous topic - next topic


i wanted people to look at the schematic and tell me if they think it will work so i can change it, i am already thinking i need an AAx4 pack thanks in advance. P.S i now i need to change to wire positions connecting to the servo/Users/zackpotoskie/Desktop/Untitled Sketch_bb.jpg


I don't think you want to connect 2 x power sources together. GND from Arduino to breadboard ground, and GND / +ve from batteries to GND/+ve of breadboard.



i wanted people to look at the schematic

What schematic all you posted was a physical layout.

No not conect a battery directly to the 5V line you will blow up the arduino or your USB hub. It would be wise to also include some capacitors on the power rails.

Go Up