Go Down

Topic: Replacement electrodes for Seeed Studio EMG ? (Read 740 times) previous topic - next topic

amundsen

Hello,

I've got this EMG detector from Seeed Studio.

I want to buy replacement electrodes. There are many shops online where one can buy electrodes but it is not clear to which standard the Seeed electrode's pin size does comply. Seeed Studio itself doesn't seem to know. Maybe someone here has an idea ?

Thank you in advance.




johnwasser

You can order these from Grainger industrial supply:

http://www.grainger.com/product/23LT30?gclid=CJ-vlLmVlb8CFU4sjgodgTIAVQ

$7.85 for a package of 10.

They also have:
$18.93 for a package of 25
$27.25 for a package of 50 of the smaller (pediatric) size.
Send Bitcoin tips to: 1G2qoGwMRXx8az71DVP1E81jShxtbSh5Hp
See who has no social life: https://forum.arduino.cc/index.php?action=stats :)

amundsen

Thanks, however my concern is more about the snap size. The snaps from the electrodes shipped with the Seeed circuit have a pin with a diameter of 3.5mm but some electrodes seem to have a diameter of 3.9mm. This information is almost never displayed on the e-shop's pages!  :(

Go Up