SSH into OpenWRT
Install either the UVC driver (if not already installed) e.g. opkg install kmod-video-uvc where i need to install them? and how?
- Open your web browser to: http://arduino.local:8080/?action=stream for a stream or http://192.168.1.1:8080?action=snapshot for a single snappy- Enjoy
2- Then you need to mount the MicroSD, you need to type those commands in putty while connected to the openWRT. The commands you need to type are in bold- add your micro sd card (it should appear as /dev/sda1 by default)- Create a folder or mount point /mnt/sda1 (mkdir /mnt/sda1)- mount your sd card - mount /dev/sda1 /mnt/sda1