Way 2: Step 1: Connect PIN34 to the power supply PIN.Step 2: Supply power tomodule (the PIN34 is also supplied with high level since the PIN34 is connected withpower supply PIN). Thenthe module will enter to AT module. But at this time, the baudrate is 38400. In this way, user should change the baud rate at the AT mode, if theyforget the communication baud rate.
KEY: PIN26, for master abandons memory.
Hi, is it possible to factory reset the HC-06?I experimented with setting a baud rate > 115200 (AT+BAUDA 460800).