Go Down

Topic: Will a USBASP programmer work like an AVRISP mkII? (Read 2083 times) previous topic - next topic

Q12-00006

Hello. I want to use the USB port on the Arduino Uno or Mega2560 to transmit midi. The best way to do this seems to be installing HIDUINO (https://github.com/ddiakopoulos/hiduino) on the USB control chip. The page I linked to mentions the AVRISPMKII, but would a cheaper generic programmer from eBay like this one (http://www.ebay.co.uk/itm/USBASP-USB-ISP-Programmer-Cable-Converter-AVR-ATMEL-/171253746319?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item27df84ca8f) work.

CrossRoads

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

leo72

I think any programmer that is supported by the IDE (i.e. USBtinyISP, USBasp etc) could be used to upload the firmware on the 8/12U2. I also think that another Arduino with the sketch ArduinoISP can be used.
In the past I flash the 8U2 of my older Arduino UNO R1 with USBtinyISP.


Q12-00006


Go Up